86-371-64696502
Sanlizhuang Industrial Park, Zhengzhou, Henan, China
China widely used mining and highway stone Jaw Crusher
Introduction of Stone jaw crusher:
XKJ Jaw Crusher machine, including coarse crusher and fine crusher, is featured by large ratio of reduction, uniform size, simple structure, reliable working, easy maintenance, and low operation cost.
Its compression strength is less than 320Mpa and the feeding size ranges from 125mm to 1020mm. As the preferred equipment for primary and secondary crushing, stone jaw crusher absorbs the advantages of similar products all over the world in terms of design, production and aftersales service.
Features and Benefits Stone Jaw crusher:
1. High crushing ratio, uniform particle size.
2. Point eclipse discharge opening adjustment device, reliable and easy to adjust the range to meet the needs of different customers.
3. Safe and reliable lubrication system, easy to replace parts, low maintenance workload.
4. Simple structure, reliable function, low operating cost.
Working Principles of Stone Jaw Crusher:
Jaw Crusher's crushing style is the type of driving extrusion. The motor drives the belt and belt pulley to make the moveable jaw move through the eccentric shaft. When movable jaw is rising ,the included angle between the wrist plate and movable jaw become bigger to drive the movable plate to be close to the movable plate. At the same time the material is squeezed and rubbed, rolled to achieve multiple crushing, 
It is widely applied in the mines, smelting, building materials, AAC production line, gravel production line, ceramsite sand production line, cement plant, highway, railway, water conservancy and chemicals etc.
MainTechnical Parameters of Jaw Crusher:
Model | Feed mouth size(mm) | Max feed size(mm) | Setting adjustment range(mm) | outpu(t/h) | rotation speed(r/min) | power | weight | Equipment size |
PEF-60×100 | 60×100 | 50 | 3-15 | 0.1-0.4 | 380 | 1.5 | 0.17 | 420×360×450 |
PEF-100×150 | 100×150 | 90 | 5-20 | 0.4-1.8 | 380 | 2.2 | 0.4 | 615×449×520 |
PEF-150×250 | 150×250 | 125 | 10-40 | 1-4 | 300 | 5.5 | 0.8 | 875×750×950 |
PEF-250×400 | 250×400 | 210 | 20-60 | 5-15 | 280 | 15 | 2.6 | 1108×1090×1392 |
PEF-400×600 | 400×600 | 340 | 40-110 | 10-40 | 275 | 30 | 6.7 | 1663×1730×1600 |
PEF-500×750 | 500×750 | 425 | 50-120 | 40-90 | 250 | 55 | 10.5 | 1930×2060×2250 |
PEF-600×900 | 600×900 | 500 | 65-200 | 50-180 | 250 | 75 | 17.6 | 2600×2206×2400 |
PEF-750×1060 | 750×1060 | 630 | 80-210 | 110-320 | 225 | 110 | 26 | 2660×2430×2800 |
PEF-900×1200 | 900×1200 | 750 | 95-220 | 150-400 | 218 | 160 | 48 | 3135×2966×3220 |
PEF-1000×1200 | 1000×1200 | 850 | 95-265 | 180-450 | 200 | 160 | 52 | 3480×2876×3330 |
PEF-1200×1500 | 1200×1500 | 1020 | 150-350 | 270-600 | 180 | 200 | 88 | 4300×3780×4030 |
PEX-150×750 | 150×750 | 120 | 18-48 | 8-25 | 310 | 15 | 3.7 | 1200×1530×1060 |
PEX-250×750 | 250×750 | 210 | 25-60 | 13-35 | 300 | 30 | 4.9 | 1380×1750×1540 |
PEX-250×1000 | 250×1000 | 210 | 25-60 | 16-52 | 300 | 37 | 7.2 | 1530×1990×1390 |
PEX-250×1200 | 250×1200 | 210 | 25-60 | 20-61 | 330 | 45 | 7.9 | 1640×2190×1580 |
PEX-300×1300 | 300×1300 | 250 | 20-90 | 20-130 | 280 | 75 | 12.6 | 1720×2350×1730 |
1. Pre-sale services:
1>. Select proper equipment model;
2>. Design and manufacture products according to clients' special requirement;
3>. Arrange for visiting our factory, assist them to handle relative procedure, such as visa.
2. Services during the sale:
1>. Make sure goods prepared within delivery time;
2>. Pre-check and accept products ahead of delivery;
3>. Prepare documents required to help customer pass customs clearance.
4>. Help clients to make Project evaluation and feasibility analysis and draft solving plans.
3. After-sale services:
1>. Assist clients to prepare for the first construction scheme;
2>. Install, debug and examine the equipment;
3>. Train technical personnel the first-line operators;
4>. Provide technical exchanging
5>. Offer spare parts at a best price for long term.
Note: Responsible for handling other required matters conforming the state regulations.
